TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FAS STANDARD 100 boards are designed for use as a thermal insulation layer in facade systems with an external plaster layer on low-rise buildings and structures (up to 10 m high), as well as on wall sections located inside glazed loggias and balconies, staircases and landings of multi-story buildings regardless of their height
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
100±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Compressive stress at 10% linear deformation, kPa, not less than |
20 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
10 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | |
| Quantity per package, m2 | 4.320 | 2.160 | |
| Quantity per package, m3 | 0.216 | 0.216 | |
| Quantity per pallet, packages, pcs | 32 | 32 | |
| Quantity per pallet, m3 | 6.912 | 6.912 | |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL slabs FAS EXTRA 90 are designed for use as a thermal insulation layer in facade systems with an external plaster layer for application indoors on glazed loggias and balconies (height limitation up to 3 m) in multi-story buildings
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
90±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Compressive stress at 10% linear deformation, kPa, not less than |
15 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | |
| Quantity per package, m2 | 4.320 | 2.160 | |
| Quantity per package, m3 | 0.216 | 0.216 | |
| Quantity per pallet, packages, pcs | 32 | 32 | |
| Quantity per pallet, m3 | 6.912 | 6.912 | |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U 23.9-32944149-013:2024
Roll roofing and waterproofing material
Product Description and Scope of Application
HYDROBASE VENT is a torch-applied bitumen-polymer roofing and waterproofing roll material.
HYDROBASE VENT EKV consists of a polyester fabric base coated on both sides with bitumen-polymer binder, with protective layers on top in the form of coarse-grained granules and on the bottom in the form of fine-grained granules. An additional layer of bitumen-polymer binder is applied in strips to the lower protective layer. To prevent the material from sticking, the strips are covered with a polymer film. The material is used for installing a single-layer ventilated (“breathable”) roofing membrane.
HYDROBASE VENT EPV consists of a polyester fabric base coated on both sides with bitumen-polymer binder, with protective layers on top in the form of polyethylene film and on the bottom in the form of fine-grained granules. An additional layer of bitumen-polymer binder is applied in strips to the lower protective layer. To prevent the material from sticking, the strips are covered with a polymer film. The material is used for installing the bottom layer of a two-layer ventilated (“breathable”) roofing membrane.
Transportation and Storage
Transportation is carried out by all types of transport in covered vehicles in accordance with the Cargo Transportation Rules applicable to the given type of transport. Throughout the entire storage period, the material must be protected from atmospheric precipitation. Rolls are stored vertically on pallets in a single row by height.
Packaging Information
The material is packaged in UV-stabilized film and supplied on pallets.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main characteristics
| Parameter name | HYDROBASE VENT EPV | HYDROBASE VENT EKV |
Test Method |
||
| Thickness, mm |
3.8 ± 0.2 |
4.2 ± 0.2 |
EN 1849-1 |
||
| Mass per unit area, kg/m²* (+0.25 kg) |
4,8 |
5,0 |
EN 1849-1 |
||
| Watertightness at 2 kPa pressure for 24 hours |
No water penetration |
EN 1928 |
|||
| Watertightness at 60 kPa pressure for 24 hours |
– |
EN 1928 |
|||
| Tensile strength, N, minimum
– longitudinal/transverse |
489/343 |
588/392 |
DSTU B V.2.7-83 |
||
| Flexibility on a bar with a radius of (25.0±0.2) mm at temperature, °C, maximum |
-20 |
-20 |
DSTU B V.2.7-83 |
||
| Flow resistance at elevated temperature, °C |
≥95 |
≥95 |
EN 1110 |
||
| Loss of coarse-grained surfacing, g/sample, maximum |
– |
1 |
DSTU B V.2.7-83 |
||
| Reaction to fire | Class E | DSTU EN 13501-1 | |||
| Type of protective coating: |
|
|
|||
| top side
torch-on side |
film ventilated covering |
slate ventilated covering |
|
||
| Length/width, m |
10×1 |
10×1 | |||
| Pallet packaging |
white heat-shrink bag with logo |
||||
*- the mass per 1 m² is provided for reference; the material is standardized by thickness. The manufacturer reserves the right to change this parameter;
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ROOF N is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock. THERMOWOOL ROOF N boards are designed for use in civil and industrial construction as a thermal insulation layer in new construction and renovation of buildings and structures of various purposes as a lower layer in two- or three-layer roof insulation systems.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL ROOF N EXTRA 100 |
THERMOWOOL ROOF N OPTIMA 110 |
THERMOWOOL ROOF N PROF 120 |
Test Method |
| Density, kg/m3 |
100±10 |
110±10 |
120±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
0,036 |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
0.039 |
0.041 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
30 |
30 |
40 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
– |
7,5 |
7,5 |
DSTU EN 1607 |
| Point load, N, minimum |
400 |
450 |
350 |
EN 12430 |
| Long-term water absorption, kg/m2, not more than |
3 |
3 |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
1 |
1 |
EN 1609 |
| Reaction to fire |
A1 |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL ROOF N EXTRA 100 |
THERMOWOOL ROOF N OPTIMA 110 |
THERMOWOOL ROOF N PROF 120 |
Test Method |
||
| Length |
mm |
1200 |
1200 |
1200 |
DSTU EN 822 |
||
| Width |
mm |
600 |
600 |
600 |
DSTU EN 822 |
||
| Thickness (in 10 mm increments) |
mm |
50-200 |
50-200 |
50-180 |
DSTU EN 823 |
||
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
||
| Thickness tolerance class | T5 | ||||||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 120 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | 2 | 2 |
| Quantity per package, m2 | 4.32 | 2.16 | 1.44 | 1.44 |
| Quantity per package, m3 | 0.216 | 0.216 | 0.172 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 | 40 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FAS PROF 145 is a non-combustible, hydrophobized thermal and sound insulation board made of mineral wool based on basalt group rocks
THERMOWOOL FAS PROF 145 boards are designed for use in civil and industrial construction as thermal and sound insulation in external wall insulation systems with a protective and decorative layer of thin-layer plaster.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
145±14 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,039 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.042 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
40 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
15 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 160 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
| Logistics Parameters | |||
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 120 |
| Quantity per package, boards, pcs, | 4 | 2 | 2 |
| Quantity per package, m2 | 2.88 | 1.44 | 1.44 |
| Quantity per package, m3 | 0.144 | 0.144 | 0.173 |
| Quantity per pallet, packages, pcs | 48 | 48 | 40 |
| Quantity per pallet, m3 | 6.912 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92, m3 | 76.032 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FAS EFFECT 135 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock
THERMOWOOL FAS EFFECT 135 boards are designed for use in civil and industrial construction as thermal and sound insulation in external wall insulation systems with a protective and decorative thin-layer plaster coating.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
135±13 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,038 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.042 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
40 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
15 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40 – 180 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
| Logistics Parameters: | |||
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 120 |
| Boards per pack, pcs | 4 | 2 | 2 |
| Coverage per pack, m2 | 2.88 | 1.44 | 1.44 |
| Volume per pack, m3 | 0.144 | 0.144 | 0.173 |
| Packs per pallet, pcs | 48 | 48 | 40 |
| Volume per pallet, m3 | 6.912 | 6.912 | 6.912 |
| Truck loading capacity (92 m3), m3 | 76.032 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FAS OPTIMA 120 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks
THERMOWOOL FAS OPTIMA 120 boards are designed for use in civil and industrial construction as thermal and sound insulation in external wall insulation systems with a protective and decorative layer of thin-layer plaster.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
120±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.040 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
30 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
15 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 180 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 150 |
| Quantity per package, boards, pcs, | 4 | 2 | 2 |
| Quantity per package, m2 | 2.88 | 1.44 | 1.44 |
| Quantity per package, m3 | 0.144 | 0.144 | 0.216 |
| Quantity per pallet, packages, pcs | 48 | 48 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FAS DECOR 115 are non-combustible, hydrophobized thermal and sound insulation boards made of mineral wool based on basalt group rocks
THERMOWOOL FAS DECOR 115 boards are designed for use as a thermal insulation layer in facade systems with an external plaster layer, as well as on wall sections located inside glazed loggias and balconies, wall sections of stairways and landings of multi-story buildings regardless of their height.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
115±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
30 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
12 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | |
| Quantity per package, m2 | 4.320 | 2.160 | |
| Quantity per package, m3 | 0.216 | 0.216 | |
| Quantity per pallet, packages, pcs | 32 | 32 | |
| Quantity per pallet, m3 | 6.912 | 6.912 | |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOFACE OPTIMA is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOFACE OPTIMA boards are designed for use in civil and industrial construction as thermal and sound insulation in external wall insulation systems with a protective and decorative thin-layer plaster coating (without height restrictions).
Application instructions:
In accordance with “Recommendations for the design of thermal insulation of enclosing structures of residential, public and industrial buildings”.
Storage:
The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from atmospheric precipitation. The height of the board stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
Value |
Test Method |
|
Tensile strength limit in the direction perpendicular to the surface |
MPa |
not less than |
0,015 |
DSTU B V.2.7-38 |
|
Compressive strength at 10% linear deformation |
MPa |
not less than |
0,03 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,038 0,040* 0,042* |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption during partial immersion by mass |
% |
not more than |
10 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
4,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
120±10 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
Not less than |
50* |
DSTU B V.2.7-182 |
* – according to Protocol No. 112k-23 of the State Enterprise NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 180 (±2) |
DSTU B V.2.7-38 |
|
|
Logistics Parameters |
|||
|
Length, mm |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
150 |
|
Quantity per package, boards, pcs |
4 |
2 |
2 |
|
Quantity per package, m2 |
2,88 |
1,44 |
1,44 |
|
Quantity per package, m3 |
0,144 |
0,144 |
0,216 |
|
Quantity per pallet, packages, pcs |
48 |
48 |
32 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
|
Loading capacity in a vehicle with a volume of 92 m3 |
76,032 |
76,032 |
76,032 |
TU U V.2.7-23.9-35492904-001:2013
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOFACE EFFECT is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOFACE EFFECT boards are designed for use in civil and industrial construction as thermal and sound insulation in external wall insulation systems with a protective and decorative layer of thin-layer plaster.
Storage:
The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from atmospheric precipitation. The height of the board stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
Value |
Test Method |
|
Tensile strength in the direction perpendicular to the surface |
MPa |
not less than |
0,015 |
DSTU B V.2.7-38 |
|
Compressive strength at 10% linear deformation |
MPa |
not less than |
0,04 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λb |
W/m·K |
not more than |
0,039 0,042* 0,044* |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption during partial immersion by mass |
% |
not more than |
10 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
4,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
135±13 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
Not less than |
50* |
DSTU B V.2.7-182 |
* – according to Protocol No. 115k-23 of the State Enterprise NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
Length |
mm |
1200 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
30 – 160 (±2) |
DSTU B V.2.7-38 |
|
Logistics Parameters |
|||
|
Length, mm |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
120 |
|
Quantity per package, boards, pcs |
4 |
2 |
2 |
|
Quantity per package, m2 |
2,88 |
1,44 |
1,44 |
|
Quantity per package, m3 |
0,144 |
0,144 |
0,173 |
|
Quantity per pallet, packages, pcs |
48 |
48 |
40 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
|
Loading rate in vehicle, volume, m3 |
76,032 |
76,032 |
76,032 |