TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
ULTRAWOOL VIBRO is a non-combustible, hydrophobized thermal and sound insulation board made of mineral wool based on basalt group rocks. ULTRAWOOL VIBRO boards are designed for thermal and sound insulation of floating floors when laying concrete or cement screed directly on the thermal insulation.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
110±11 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.040 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
25 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
– |
DSTU EN 1607 |
| Point load, N, minimum |
50 |
EN 12430 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
| Logistics Parameters: | ||
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm | 50 | 100 |
| Boards per pack, pcs | 6 | 3 |
| Coverage per pack, m2 | 4.32 | 2.160 |
| Volume per pack, m3 | 0.216 | 0.216 |
| Packs per pallet, pcs | 32 | 32 |
| Volume per pallet, m3 | 6.912 | 7.912 |
| Truck loading capacity (92 m3), m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
ULTRAWOOL SOUND are non-combustible, hydrophobized sound-absorbing boards made of mineral wool based on basalt group rocks. The special arrangement of fibers provides high sound absorption properties.
ULTRAWOOL SOUND is recommended for use as a sound absorber in frame-panel partition and lining structures, in suspended ceiling structures, and in floor structures with non-load-bearing insulation material installation schemes
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
38±4 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Sound absorption coefficient,
Boards 40 mm thick Boards 100 mm thick Boards 150 mm thick Boards 200 mm thick |
Class C Class A Class A Class A |
EN ISO 11654 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1000, 1200 |
DSTU EN 822 |
| Width |
mm |
500, 600, 1000 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs. | 8 | 4 |
| Quantity per package, m2 | 5.760 | 2.880 |
| Quantity per package, m3 | 0.288 | 0.288 |
| Quantity per pallet, packages, pcs | 24 | 24 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
ULTRAWOOL BRICK is a non-combustible, hydrophobized thermal and acoustic insulation board made from mineral wool based on basalt group rocks.
ULTRAWOOL BRICK boards are recommended for use as thermal and acoustic insulation in various types of multi-layer masonry, frame walls (including exterior walls) with different types of external cladding (siding).
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
42±4 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
– |
DSTU EN 826 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1000, 1200 |
DSTU EN 822 |
| Width |
mm |
500, 600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs., | 8 | 4 |
| Quantity per package, m2 | 5.760 | 2.880 |
| Quantity per package, m3 | 0.288 | 0.288 |
| Quantity per pallet, packages, pcs | 24 | 24 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FLOOR is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock. THERMOWOOL FLOOR boards are designed for thermal and sound insulation of floating floors when laying concrete or cement screed directly on the thermal insulation.
Transportation and Storage
Transportation of the boards is carried out in accordance with the requirements of DSTU B V.2.7-167. The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from atmospheric precipitation. The height of the board stack during storage must not exceed 3 m. The guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL FLOOR STANDARD 110 |
THERMOWOOL FLOOR PROF 170 |
Test Method |
| Density, kg/m3 |
110±11 |
170±15 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
0,039 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.040 |
0.043 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
25 |
50 |
DSTU EN 826 |
| Point load, N, minimum |
50 |
600 |
EN 12430 |
| Impact sound insulation improvement index of the floor, dB
30mm 40mm 50mm |
36 38 40 |
|
DSTU B V.2.6-86 ISO 140-6 |
| Reaction to fire |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL FLOOR STANDARD 110 |
THERMOWOOL FLOOR PROF 170 |
Test Method |
||
| Length |
mm |
1200 |
1200 |
DSTU EN 822 |
||
| Width |
mm |
600 |
600 |
DSTU EN 822 |
||
| Thickness (in 10 mm increments) |
mm |
50-200 |
30-100 |
DSTU EN 823 |
||
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
||
| Thickness tolerance class | T4 T5 | |||||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm | 50 | 30 |
| Quantity per package, boards, pcs | 6 | 7 |
| Quantity per package, m2 | 4.32 | 5.04 |
| Quantity per package, m3 | 0.216 | 0.151 |
| Quantity per pallet, packages, pcs | 32 | 48 |
| Quantity per pallet, m3 | 6.912 | 7.258 |
| Loading capacity in vehicle, volume 92, m3 | 76.032 | 79.834 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ACOUSTIC 40 is a non-combustible, hydrophobized sound-absorbing board made of mineral wool based on basalt group rock. The special fiber arrangement provides high sound absorption properties.
THERMOWOOL ACOUSTIC 40 boards are recommended for use as sound absorbers in frame partition and lining structures, suspended ceiling structures, and in floor structures with non-load-bearing insulation material installation.
Transportation and Storage
The boards are transported in accordance with the requirements of DSTU B V.2.7-167. The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The stack height during storage must not exceed 3 m. The guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
40±5 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.041 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
DSTU EN 826 |
| Sound absorption coefficient,
Boards 40 mm thick Boards 100 mm thick Boards 150 mm thick Boards 200 mm thick |
Class C Class A Class A Class A |
EN ISO 11654 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Logistics Parameters | ||
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs. | 12 | 6 |
| Quantity per package, m2 | 8.64 | 4.32 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 16 | 16 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading standard in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL BLOCK are non-combustible, hydrophobized thermal and sound insulation boards made of mineral wool based on basalt group rocks.
THERMOWOOL BLOCK boards are recommended for use in industrial and civil construction as thermal and sound insulation for various types of multi-layer masonry, frame walls (including exterior walls) with different types of external finishes (siding). They are also used as the first (inner) thermal insulation layer in ventilated facade systems with an air gap in a two-layer configuration.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL BLOCK STANDARD 45 |
THERMOWOOL BLOCK OPTIMA 55 |
THERMOWOOL BLOCK PROF 65 |
Test Method |
| Density, kg/m3 |
45±5 |
55±5 |
65±5 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
0,035 |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
0.040 |
0.040 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
0,5 |
5 |
DSTU EN 826 |
| Long-term water absorption, kg/m2, not more than |
3 |
3 |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
1 |
1 |
EN 1609 |
| Reaction to fire |
A1 |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL BLOCK STANDARD 45 |
THERMOWOOL BLOCK OPTIMA 55 |
THERMOWOOL BLOCK PROF 65 |
Test Method |
||
| Length |
mm |
1200 |
1200 |
1200 |
DSTU EN 822 |
||
| Width |
mm |
600 |
600 |
600 |
DSTU EN 822 |
||
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
50 – 200 |
50 – 200 |
DSTU EN 823 |
||
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
||
| Thickness tolerance class | T4 | ||||||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 12 | 6 |
| Quantity per package, m2 | 8.64 | 4.32 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 16 | 16 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL LIGHT are non-combustible, hydrophobized thermal and acoustic insulation boards made of mineral wool based on basalt group rocks.
THERMOWOOL LIGHT EXTRA 30 boards are designed for thermal and acoustic insulation of building structures in residential buildings and industrial facilities where the insulation does not bear external loads (attics, attic floors, floors with insulation laid between joists; frame partitions).
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL LIGHT EXTRA 30 |
THERMOWOOL LIGHT OPTIMA 35 |
Test Method |
| Density, kg/m3 |
30±5 |
35±5 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,038 |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.041 |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
0,5 |
DSTU EN 826 |
| Long-term water absorption, kg/m2, not more than |
3 |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
1 |
EN 1609 |
| Reaction to fire |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL LIGHT EXTRA 30 |
THERMOWOOL LIGHT OPTIMA 35 |
Test Method |
|
| Length |
mm |
1200 |
1200 |
DSTU EN 822 |
|
| Width |
mm |
600 |
600 |
DSTU EN 822 |
|
| Thickness (in 10 mm increments) |
mm |
50-100, 150-200 |
50-100, 130-200 |
DSTU EN 823 |
|
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
|
| Thickness tolerance class | T2 | ||||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm | 50 | 100 |
| Quantity per package, boards, pcs | 12 | 6 |
| Quantity per package, m2 | 8.64 | 4.32 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 24 | 24 |
| Quantity per pallet, m3 | 10.368 | 10.368 |
| Loading capacity in truck, volume 92 m3 | 114.048 | 114.048 |
TU U V.2.7-23.9-35492904-001:2013
Product Description:
TECHNOBLOCK is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOBLOCK boards are recommended for use in individual, cottage, and low-rise construction as thermal and sound insulation for various types of multi-layer masonry, frame walls (including exterior walls) with different types of external finishes (siding). They are also suitable as the first (inner) thermal insulation layer in ventilated facade systems with an air gap in a two-layer configuration.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material must ensure reliable and secure packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
TECHNOBLOCK STANDARD |
Test Method |
|
Compressibility |
% |
not more than |
10 |
DSTU B V.2.7-38-95 |
|
Flammability |
degree |
– |
Incombustible |
DBN V.1.1-7-2016 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,036 0,039* 0,041* |
DSTU B V.2.7-105-2000 DSTU B V.2.7-182:2009 DSTU B V.2.7-182:2009 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
GOST 25898-2012 |
|
Moisture content by mass |
% |
not more than |
0,5 |
DSTU B V.2.7-38-95 |
|
Water absorption during partial immersion by mass |
% |
not more than |
10 |
DSTU B V.2.7-38-95 |
|
Organic matter content |
% |
not more than |
2,5 |
DSTU B V.2.7-38-95 |
|
Density |
kg/m3 |
– |
45±5 |
DSTU B V.2.7-38-95 |
|
Effective service life |
years |
not less than |
50 |
DSTU B V.2.7-182:2009 |
* – according to Protocol No. 43k/22 of SE NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
Length |
mm |
1200 (±10) |
DSTU B V.2.7-38-95 |
|
Width |
mm |
600 (±5) |
DSTU B V.2.7-38-95 |
|
Thickness (in 10 mm increments) |
mm |
50 – 200 (+5,-2) |
DSTU B V.2.7-38-95 |
|
Length, mm |
1200 |
1200 |
|
Width, mm |
600 |
600 |
|
Thickness, mm |
50 |
100 |
|
Quantity per package, boards, pcs |
12 |
6 |
|
Quantity per package, m2 |
8,64 |
4,32 |
|
Quantity per package, m3 |
0,432 |
0,432 |
|
Quantity per pallet, packages, pcs |
16 |
16 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
|
Loading capacity in a vehicle with a volume of 92 m3 |
76,032 |
76,032 |
TU U V.2.7-23.9-35492904-001:2013
Product Description
TECHNOLIGHT is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOLIGHT boards are designed for thermal and sound insulation of building structures in residential buildings and industrial facilities where the insulation does not bear external loads (attics, attic floors, floors with insulation laid between joists; frame partitions), as well as the first (inner) thermal insulation layer in ventilated facade systems with an air gap when using a two-layer insulation configuration.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main Physical and Mechanical Characteristics
|
Parameter |
Unit of measurement |
Criterion |
TECHNOLIGHT EXTRA |
TECHNOLIGHT OPTIMA |
Test Method |
|
Compressibility |
% |
not more than |
30 |
30 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λb |
W/m·K |
not more than |
0,038* 0,041* 0,042* |
0,038 0,039 0,041 |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
0,3 |
GOST 25898 |
|
Moisture content by mass |
% |
not more than |
0,5 |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption during partial immersion by mass |
% |
not more than |
15 |
15 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
2,5 |
2,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
30±5 |
35±5 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
not less than |
50 |
50 |
DSTU B V.2.7-182 |
* – according to Protocol No. 44k/22 of the State Enterprise NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
Length |
mm |
1200 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50-100, 150-200 (+5,-2) |
DSTU B V.2.7-38 |
|
Logistics Parameters |
||
|
Length, mm |
1200 |
1200 |
|
Width, mm |
600 |
600 |
|
Thickness, mm |
50 |
100 |
|
Quantity per package, boards, pcs |
12 |
6 |
|
Quantity per package, m2 |
8,64 |
4,32 |
|
Quantity per package, m3 |
0,432 |
0,432 |
|
Quantity per pallet, packages, pcs |
24 |
24 |
|
Quantity per pallet, m3 |
10,368 |
10,368 |
|
Loading rate in vehicle, volume, m3 |
114,048 |
114,048 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOVENT N is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOVENT N boards are designed for use in civil and industrial construction during new construction and reconstruction of buildings and structures for various purposes as an inner layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
TECHNOVENT N |
TECHNOVENT N PROF |
Test Method |
|
Compressive strength at 10% deformation |
MPa |
not less than |
– |
– |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
NG |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,038 0,039* 0,041* |
0.037 0.040** 0.043** |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Compressibility |
% |
not more than |
20 |
10 |
DSTU B V.2.7-38 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
2,5 |
2,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
36±4 |
45+5 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
not less than |
50 |
50 |
DSTU B V.2.7-182 |
* – according to Protocol No. 42K/22 of SE NDIBK
** – according to Protocol No. 37-16/20 of SE NDIBMV
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 100, 130 – 200 (-2, +5) |
DSTU B V.2.7-38 |
|
|
Logistics Parameters |
||||
|
Length, mm |
1200 |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
150 |
200 |
|
Quantity per package, boards, pcs |
12 |
6 |
4 |
3 |
|
Quantity per package, m2 |
8,64 |
4,32 |
2,88 |
2,16 |
|
Quantity per package, m3 |
0,432 |
0,432 |
0,432 |
0,432 |
|
Quantity per pallet, packages, pcs |
16 |
16 |
16 |
16 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
6,912 |
|
Loading capacity in a vehicle with a volume of 92 m3 |
76,032 |
76,032 |
76,032 |
76,032 |