TU U V.2.7-23.9-35492904-005:2015
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOVENT N is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOVENT N boards are designed for use in civil and industrial construction during new construction and reconstruction of buildings and structures for various purposes as an inner layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
TECHNOVENT N |
TECHNOVENT N PROF |
Test Method |
|
Compressive strength at 10% deformation |
MPa |
not less than |
– |
– |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
NG |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,038 0,039* 0,041* |
0.037 0.040** 0.043** |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Compressibility |
% |
not more than |
20 |
10 |
DSTU B V.2.7-38 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
2,5 |
2,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
36±4 |
45+5 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
not less than |
50 |
50 |
DSTU B V.2.7-182 |
* – according to Protocol No. 42K/22 of SE NDIBK
** – according to Protocol No. 37-16/20 of SE NDIBMV
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 100, 130 – 200 (-2, +5) |
DSTU B V.2.7-38 |
|
|
Logistics Parameters |
||||
|
Length, mm |
1200 |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
150 |
200 |
|
Quantity per package, boards, pcs |
12 |
6 |
4 |
3 |
|
Quantity per package, m2 |
8,64 |
4,32 |
2,88 |
2,16 |
|
Quantity per package, m3 |
0,432 |
0,432 |
0,432 |
0,432 |
|
Quantity per pallet, packages, pcs |
16 |
16 |
16 |
16 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
6,912 |
|
Loading capacity in a vehicle with a volume of 92 m3 |
76,032 |
76,032 |
76,032 |
76,032 |
Product Description:
SWEETONDALE Pipe Section is a thermal insulation pipe section made of mineral wool based on basalt rock. Can be manufactured laminated with reinforced aluminum foil. Laminated pipe sections have a self-adhesive foil overlap, which significantly simplifies installation.
Application:
Thermal insulation of process pipelines at facilities in various industries (including food industry) and construction sector.
Maximum application temperature +650°C.
Combustibility group NG according to DSTU B V.2.7-19-95 (GOST 30244-94).
Used in civil and industrial construction for new construction, reconstruction, and insulation of pipelines for various purposes.
Can be used on round air ducts as a thermal insulation layer.
Application instructions:
According to the “Album of Technical Solutions for Equipment and Pipeline Thermal Insulation Systems” and installation instructions “Pipe Section Installation”.
Storage:
Store in covered warehouses, preventing exposure to precipitation. During transportation, protect from damage and moisture.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Products are shipped to the consumer no earlier than 24 hours after storage in the warehouse.
Packaging Information:
Pipe sections are packed in cardboard boxes.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Pipe Section 80 |
Pipe Section 120 |
Test Method |
| Density |
kg/m3 |
70-110 |
110-140 |
DSTU B V.2.7-38-95 |
| Compaction coefficient, Kc* |
– |
1-1,05 |
1-1,05 |
SNiP 2.04.14-88 |
| Thermal conductivity, λ25 |
W/m K |
0,038** |
0,037 |
DSTU B V.2.7-105-2000 |
| Thermal conductivity, λ125 |
W/m K |
0,048** |
0,048 |
DSTU B V.2.7-105-2000 |
| Thermal conductivity, λ300 |
W/m K |
0,086** |
0,087 |
DSTU B V.2.7-105-2000 |
| Tensile strength, not less than |
kPa |
15 |
20 |
DSTU B V.2.7-38-95 |
| Moisture content by mass, not more than |
% |
0,5 |
0,5 |
DSTU B V.2.7-38-95 |
| Organic matter content |
%, not more than |
4,5 |
4,5 |
DSTU B V.2.7-38-95 |
| Combustibility class |
group |
NG |
NG |
DSTU B V.2.7-70-98 |
*- the range of diameters corresponds to standard pipe diameters;
**- according to protocol No. 60K/17.
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
| Pipe section length |
mm |
1000 (±2%) |
| Pipe diameter (internal diameter of pipe section)* |
mm |
18-324 (+5 mm; -2 mm) |
| Pipe section wall thickness |
mm |
20-100 (in increments of 10); 120 (+5 mm; -2 mm) |
Rigid Stone Wool Board
Product Description:
Technical insulation – rigid stone wool board. The boards are manufactured from mineral wool based on basalt group rock.
Can be produced laminated with reinforced aluminum foil or fiberglass cloth on one side. A significant difference between Technical Insulation boards and general construction insulation is the wide operating temperature range of the board.
Application:
Designed for thermal insulation of air ducts, gas ducts, electrostatic precipitators, tanks, boilers, process equipment, flat vertical and horizontal surfaces, furnaces, at facilities in various industries and equipment of engineering systems in residential, civil and industrial construction. The board operates in a wide temperature range of the insulated surface, depending on the board grade from -180°C to +750°C, while conventional building insulation is designed for a temperature range from -60°C to +80°C.
Application instructions:
According to the “Album of Technical Solutions for Equipment and Pipeline Thermal Insulation Systems” and installation instructions “Pipe Section Installation”.
Storage:
Store in covered warehouses, preventing exposure to precipitation. During transportation, protect from damage and moisture.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Products are shipped to the consumer no earlier than 24 hours after storage in the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging.
Main physical and mechanical characteristics:
|
Parameter |
Unit requirement |
Technical insulation |
Test Method |
||||||
|
40 |
60 |
80 |
100 |
120 |
150 |
180 |
|||
| Density |
kg/m3 |
40 (±10) |
60 (±10) |
70-85 |
100 (±10) |
120 (±20) |
140-175 |
180 (±10) |
DSTU B V.2.7-38-95 |
| Thermal conductivity, λ25 |
W/m·K |
0,037 |
0,036 |
0,037* |
0,037 |
0,037 |
0,038 |
0,038 |
DSTU B V.2.7-105-2000 |
| Thermal conductivity, λ125 |
W/m·K |
0,056 |
0,055 |
0,045* |
0,051 |
0,050 |
0,051 |
0,051 |
DSTU B V.2.7-105-2000 |
| Thermal Conductivity, Λ300 |
W/m·K |
|
|
0,087* |
|
|
|
|
DSTU B V.2.7-105-2000 |
| Compressive strength at 10% linear deformation, not less than |
kPa |
– |
– |
– |
10 |
10 |
20 |
40 |
DSTU B V.2.7-38-95 |
| Moisture content by mass, not more than |
% |
0,5 |
DSTU B V.2.7-38-95 |
||||||
| Organic matter content, not more than |
% |
4,5 |
DSTU B V.2.7-38-95 |
||||||
| Combustibility class |
degree |
NG |
DSTU B V.2.7-70-98 |
||||||
*-according to protocol No. 61K/17.
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
| Length |
mm |
1200; 1000 (+5%; -2%) |
| Width |
mm |
500; 600 (±1.5%) |
| Thickness (depending on board density) |
mm |
40 kg/m³ – from 50-200 mm 60 kg/m³ – from 50-200 mm 80 kg/m³ – from 50-200 mm 100 kg/m³ – from 50-170 mm 120 kg/m³ – from 50-140 mm 150 kg/m³ – from 30-100 mm 180 kg/m³ – from 30-90 mm |