TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT EXTRA 75 FG is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock, with a single-sided fiberglass cloth coating.
THERMOWOOL VENT EXTRA 75 FG boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in double-layer thermal insulation in ventilated facade systems with an air gap. When using insulation with fiberglass cloth, a windproof membrane is not required.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
75±7 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity per vehicle, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ROOF N is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock. THERMOWOOL ROOF N boards are designed for use in civil and industrial construction as a thermal insulation layer in new construction and renovation of buildings and structures of various purposes as a lower layer in two- or three-layer roof insulation systems.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL ROOF N EXTRA 100 |
THERMOWOOL ROOF N OPTIMA 110 |
THERMOWOOL ROOF N PROF 120 |
Test Method |
| Density, kg/m3 |
100±10 |
110±10 |
120±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
0,036 |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
0.039 |
0.041 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
30 |
30 |
40 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
– |
7,5 |
7,5 |
DSTU EN 1607 |
| Point load, N, minimum |
400 |
450 |
350 |
EN 12430 |
| Long-term water absorption, kg/m2, not more than |
3 |
3 |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
1 |
1 |
EN 1609 |
| Reaction to fire |
A1 |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL ROOF N EXTRA 100 |
THERMOWOOL ROOF N OPTIMA 110 |
THERMOWOOL ROOF N PROF 120 |
Test Method |
||
| Length |
mm |
1200 |
1200 |
1200 |
DSTU EN 822 |
||
| Width |
mm |
600 |
600 |
600 |
DSTU EN 822 |
||
| Thickness (in 10 mm increments) |
mm |
50-200 |
50-200 |
50-180 |
DSTU EN 823 |
||
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
||
| Thickness tolerance class | T5 | ||||||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 120 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | 2 | 2 |
| Quantity per package, m2 | 4.32 | 2.16 | 1.44 | 1.44 |
| Quantity per package, m3 | 0.216 | 0.216 | 0.172 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 | 40 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT STANDARD 80 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
THERMOWOOL VENT STANDARD 80 boards are designed for use in industrial and civil construction as a thermal and sound insulation layer in ventilated facade systems.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
80±8 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.038 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading standard in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT N 36 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock.
THERMOWOOL VENT N 36 boards are designed for use in civil and industrial construction in new construction and reconstruction of buildings and structures for various purposes as an inner layer in two-layer thermal insulation in ventilated facade systems with an air gap.
.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
36±4 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
DSTU EN 826 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–100, 130–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 12 | 6 |
| Quantity per package, m2 | 8.640 | 4.320 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 16 | 16 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT EXTRA 75 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock.
THERMOWOOL VENT EXTRA 75 boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
75±7 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength perpendicular to the plane of the board, kPa, minimum |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity per vehicle, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL LIGHT are non-combustible, hydrophobized thermal and acoustic insulation boards made of mineral wool based on basalt group rocks.
THERMOWOOL LIGHT EXTRA 30 boards are designed for thermal and acoustic insulation of building structures in residential buildings and industrial facilities where the insulation does not bear external loads (attics, attic floors, floors with insulation laid between joists; frame partitions).
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL LIGHT EXTRA 30 |
THERMOWOOL LIGHT OPTIMA 35 |
Test Method |
| Density, kg/m3 |
30±5 |
35±5 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,038 |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.041 |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
0,5 |
DSTU EN 826 |
| Long-term water absorption, kg/m2, not more than |
3 |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
1 |
EN 1609 |
| Reaction to fire |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL LIGHT EXTRA 30 |
THERMOWOOL LIGHT OPTIMA 35 |
Test Method |
|
| Length |
mm |
1200 |
1200 |
DSTU EN 822 |
|
| Width |
mm |
600 |
600 |
DSTU EN 822 |
|
| Thickness (in 10 mm increments) |
mm |
50-100, 150-200 |
50-100, 130-200 |
DSTU EN 823 |
|
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
|
| Thickness tolerance class | T2 | ||||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm | 50 | 100 |
| Quantity per package, boards, pcs | 12 | 6 |
| Quantity per package, m2 | 8.64 | 4.32 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 24 | 24 |
| Quantity per pallet, m3 | 10.368 | 10.368 |
| Loading capacity in truck, volume 92 m3 | 114.048 | 114.048 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOROOF N is a non-combustible, hydrophobized thermal and acoustic insulation board made from mineral wool based on basalt group rocks.
Application:
In civil and industrial construction as a thermal insulation layer during new construction and renovation of buildings and structures for various purposes.
TECHNOROOF N boards are designed for use as a lower layer in a two-layer thermal insulation scheme in roofing systems with reinforced concrete or metal profiled decking. The boards are recommended for use in combination with TECHNOROOF V boards.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
TECHNOROOF N EXTRA |
TECHNOROOF N OPTIMA |
TECHNOROOF N PROF |
Test Method |
|
Compressive strength at 10% linear deformation |
MPa |
not less than |
0,03 |
0,035 |
0,04 |
DSTU B V.2.7-38 |
|
Compressive strength under point load |
N |
not less than |
400 |
450 |
500 |
DSTU B V.2.7-167 |
|
Flammability |
degree |
– |
Incombustible |
Incombustible |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,038 0,039* 0,041* |
0,038 0,039** 0,041** |
0.038 0.041 0.042 |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
0,3 |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
0,5 |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
1,5 |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
4,5 |
4,5 |
4,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
100±15 |
110±15 |
120±10 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
Not less than |
50 |
50 |
50 |
DSTU B V.2.7-182 |
* – according to Protocol No. 41-16/20 of SE NDIBMV
** – according to Protocol No. 40K/22 of SE NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
Length |
mm |
1200 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50-200 (±2) |
DSTU B V.2.7-38 |
|
Logistics Parameters |
||||
|
Length, mm |
1200 |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
120 |
150 |
|
Quantity per package, boards, pcs |
6 |
3 |
2 |
2 |
|
Quantity per package, m2 |
4,32 |
2,16 |
1,44 |
1,44 |
|
Quantity per package, m3 |
0,216 |
0,216 |
0,172 |
0,216 |
|
Quantity per pallet, packages, pcs |
32 |
32 |
40 |
32 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
6,912 |
|
Loading capacity in a vehicle with a volume of 92 m3 |
76,032 |
76,032 |
76,032 |
76,032 |
TU U V.2.7-23.9-35492904-001:2013
Product Description
TECHNOLIGHT is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOLIGHT boards are designed for thermal and sound insulation of building structures in residential buildings and industrial facilities where the insulation does not bear external loads (attics, attic floors, floors with insulation laid between joists; frame partitions), as well as the first (inner) thermal insulation layer in ventilated facade systems with an air gap when using a two-layer insulation configuration.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main Physical and Mechanical Characteristics
|
Parameter |
Unit of measurement |
Criterion |
TECHNOLIGHT EXTRA |
TECHNOLIGHT OPTIMA |
Test Method |
|
Compressibility |
% |
not more than |
30 |
30 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λb |
W/m·K |
not more than |
0,038* 0,041* 0,042* |
0,038 0,039 0,041 |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
0,3 |
GOST 25898 |
|
Moisture content by mass |
% |
not more than |
0,5 |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption during partial immersion by mass |
% |
not more than |
15 |
15 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
2,5 |
2,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
30±5 |
35±5 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
not less than |
50 |
50 |
DSTU B V.2.7-182 |
* – according to Protocol No. 44k/22 of the State Enterprise NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
Length |
mm |
1200 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50-100, 150-200 (+5,-2) |
DSTU B V.2.7-38 |
|
Logistics Parameters |
||
|
Length, mm |
1200 |
1200 |
|
Width, mm |
600 |
600 |
|
Thickness, mm |
50 |
100 |
|
Quantity per package, boards, pcs |
12 |
6 |
|
Quantity per package, m2 |
8,64 |
4,32 |
|
Quantity per package, m3 |
0,432 |
0,432 |
|
Quantity per pallet, packages, pcs |
24 |
24 |
|
Quantity per pallet, m3 |
10,368 |
10,368 |
|
Loading rate in vehicle, volume, m3 |
114,048 |
114,048 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible mineral wool boards based on basalt, laminated with glass cloth on one side
Product Description:
TECHNOVENT EXTRA SP are non-combustible, hydrophobized thermal and sound insulation boards made of mineral wool based on basalt group rocks, with a single-sided glass cloth coating.
Application:
TECHNOVENT EXTRA SP boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
Value |
Test Method |
|
Tensile strength limit in the direction perpendicular to the surface |
MPa |
not less than |
0,005 |
DSTU B V.2.7-38 |
|
Compressive strength at 10% deformation |
MPa |
not less than |
0,01 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,037 0,039* 0,040* |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Compressibility |
% |
not more than |
3 |
DSTU B V.2.7-38 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
4,0 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
75±7 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
Not less than |
50* |
DSTU B V.2.7-182 |
* – according to Protocol No. 41K/22 of the State Enterprise NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 200 (-2, +5) |
DSTU B V.2.7-38 |
|
|
Logistics Parameters |
||||
|
Length, mm |
1200 |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
150 |
200 |
|
Quantity per package, boards, pcs |
6 |
3 |
2 |
2 |
|
Quantity per package, m2 |
4,32 |
2,16 |
1,44 |
1,44 |
|
Quantity per package, m3 |
0,216 |
0,216 |
0,216 |
0,288 |
|
Quantity per pallet, packages, pcs |
32 |
32 |
32 |
24 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
6,912 |
|
Loading rate per truck, volume, m3 |
76,032 |
76,032 |
76,032 |
76,032 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOVENT EXTRA is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock.
Application:
TECHNOVENT EXTRA boards are designed for use in civil and industrial construction as a single-layer thermal insulation or as an outer layer in two-layer thermal insulation applications in ventilated facade systems with an air gap.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
Value |
Test Method |
|
Tensile strength limit in the direction perpendicular to the surface |
MPa |
not less than |
0,005 |
DSTU B V.2.7-38 |
|
Compressive strength at 10% deformation |
MPa |
not less than |
0,01 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,037 0,039* 0,040* |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Compressibility |
% |
not more than |
3 |
DSTU B V.2.7-38 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
4,0 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
75±7 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
Not less than |
50* |
DSTU B V.2.7-182 |
* – according to Protocol No. 38K/22 of the State Enterprise Research Institute of Building Constructions
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 200 (-2, +5) |
DSTU B V.2.7-38 |
|
Logistics parameters:
|
Length, mm |
1200 |
1200 |
|
Width, mm |
600 |
600 |
|
Thickness, mm |
50 |
100 |
|
Quantity per package, boards, pcs |
6 |
3 |
|
Quantity per package, m2 |
4,32 |
2,16 |
|
Quantity per package, m3 |
0,216 |
0,216 |
|
Quantity per pallet, packages, pcs |
32 |
32 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
|
Loading rate in vehicle, volume, m3 |
76,032 |
76,032 |