TU U 22.2-32944149-012:2024
Thermal insulation boards made of extruded polystyrene foam
Product Description and Scope of Application
XPS CARBOLEX ECO FAS is an insulation board made of extruded polystyrene foam with a special milled surface on both sides.
Extruded polystyrene foam CARBOLEX ECO FAS
specially designed for plastered facade structures and foundation insulation.
It can also be used for other structures where enhanced adhesion requirements are imposed on insulation boards to the substrate.
Transportation and Storage
The boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from atmospheric precipitation.
Packaging Information
The boards are packaged in UV-stabilized film.
Application Instructions
According to SWEETONDALE Installation Instructions https://sweetondale.cz/docs/instruktsii/
|
Parameter |
Value |
Test Method |
| Compressive strength, kPa, minimum
30 mm 40 mm 50 mm 60 mm and above |
150 150 200 200 |
DSTU EN 826 |
| Tensile strength perpendicular to the board surface*, kPa |
100 |
DSTU EN 1607 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,033 |
DSTU EN 12939 |
| Thermal conductivity, W/m*K λA λB |
0.035 |
DSTU B V.2.7-182 |
| Water absorption during long-term immersion, not more than, % |
0,4 |
DSTU B EN 12087 |
| Flammability |
G4 |
DBN V.1.1-7 |
| Operating temperature |
from -50 °C to +75 °C |
|
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
*- tensile strength perpendicular to the face surfaces is determined for boards manufactured using the ThermoBonding method
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1180 (±10) |
DSTU EN 822 |
| Width |
mm |
580 (±8) |
DSTU EN 822 |
| Thickness*, boards with L-edge |
mm |
30, 40, 50, 100 |
DSTU EN 822 |
| Thickness tolerance class | T1 | ||
* – boards with a thickness of 60 mm and above may be manufactured using the ThermoBonding method