Main Physical and Mechanical Properties:
| Parameter |
Value |
Test Method |
| Density, kg/m³ |
105±20 |
ДСТУ Б В.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), max. |
0,043 |
ДСТУ Б EN 12667 |
| Compressive stress at 10% linear deformation, kPa, min. |
60 |
ДСТУ EN 826 |
| Tensile strength perpendicular to the board plane, kPa, min. |
100 |
ДСТУ EN 1607 |
| Shear strength, kPa, min. |
50 |
EN 12430 |
| Long-term water absorption, kg/m², max. |
3 |
EN 12087 |
| Short-term water absorption, kg/m², max. |
1 |
EN 1609 |
| Reaction to fire |
А1 |
ДСТУ EN 13501-1 |
| Flammability class |
NG |
ДБН В.1.1-7 |
Geometric parameters – made to order
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FAS STANDARD 100 boards are designed for use as a thermal insulation layer in facade systems with an external plaster layer on low-rise buildings and structures (up to 10 m high), as well as on wall sections located inside glazed loggias and balconies, staircases and landings of multi-story buildings regardless of their height
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
100±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Compressive stress at 10% linear deformation, kPa, not less than |
20 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
10 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | |
| Quantity per package, m2 | 4.320 | 2.160 | |
| Quantity per package, m3 | 0.216 | 0.216 | |
| Quantity per pallet, packages, pcs | 32 | 32 | |
| Quantity per pallet, m3 | 6.912 | 6.912 | |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL slabs FAS EXTRA 90 are designed for use as a thermal insulation layer in facade systems with an external plaster layer for application indoors on glazed loggias and balconies (height limitation up to 3 m) in multi-story buildings
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
90±10 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Compressive stress at 10% linear deformation, kPa, not less than |
15 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50 – 200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 | 1200 |
| Width, mm | 600 | 600 | 600 |
| Thickness, mm | 50 | 100 | 150 |
| Quantity per package, boards, pcs | 6 | 3 | |
| Quantity per package, m2 | 4.320 | 2.160 | |
| Quantity per package, m3 | 0.216 | 0.216 | |
| Quantity per pallet, packages, pcs | 32 | 32 | |
| Quantity per pallet, m3 | 6.912 | 6.912 | |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT EXTRA 75 FG is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock, with a single-sided fiberglass cloth coating.
THERMOWOOL VENT EXTRA 75 FG boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in double-layer thermal insulation in ventilated facade systems with an air gap. When using insulation with fiberglass cloth, a windproof membrane is not required.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
75±7 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity per vehicle, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
ULTRAWOOL VIBRO is a non-combustible, hydrophobized thermal and sound insulation board made of mineral wool based on basalt group rocks. ULTRAWOOL VIBRO boards are designed for thermal and sound insulation of floating floors when laying concrete or cement screed directly on the thermal insulation.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
110±11 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.040 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
25 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
– |
DSTU EN 1607 |
| Point load, N, minimum |
50 |
EN 12430 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
| Logistics Parameters: | ||
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm | 50 | 100 |
| Boards per pack, pcs | 6 | 3 |
| Coverage per pack, m2 | 4.32 | 2.160 |
| Volume per pack, m3 | 0.216 | 0.216 |
| Packs per pallet, pcs | 32 | 32 |
| Volume per pallet, m3 | 6.912 | 7.912 |
| Truck loading capacity (92 m3), m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
ULTRAWOOL SOUND are non-combustible, hydrophobized sound-absorbing boards made of mineral wool based on basalt group rocks. The special arrangement of fibers provides high sound absorption properties.
ULTRAWOOL SOUND is recommended for use as a sound absorber in frame-panel partition and lining structures, in suspended ceiling structures, and in floor structures with non-load-bearing insulation material installation schemes
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
38±4 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Sound absorption coefficient,
Boards 40 mm thick Boards 100 mm thick Boards 150 mm thick Boards 200 mm thick |
Class C Class A Class A Class A |
EN ISO 11654 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1000, 1200 |
DSTU EN 822 |
| Width |
mm |
500, 600, 1000 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs. | 8 | 4 |
| Quantity per package, m2 | 5.760 | 2.880 |
| Quantity per package, m3 | 0.288 | 0.288 |
| Quantity per pallet, packages, pcs | 24 | 24 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL FLOOR is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock. THERMOWOOL FLOOR boards are designed for thermal and sound insulation of floating floors when laying concrete or cement screed directly on the thermal insulation.
Transportation and Storage
Transportation of the boards is carried out in accordance with the requirements of DSTU B V.2.7-167. The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from atmospheric precipitation. The height of the board stack during storage must not exceed 3 m. The guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
THERMOWOOL FLOOR STANDARD 110 |
THERMOWOOL FLOOR PROF 170 |
Test Method |
| Density, kg/m3 |
110±11 |
170±15 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,036 |
0,039 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.040 |
0.043 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
25 |
50 |
DSTU EN 826 |
| Point load, N, minimum |
50 |
600 |
EN 12430 |
| Impact sound insulation improvement index of the floor, dB
30mm 40mm 50mm |
36 38 40 |
|
DSTU B V.2.6-86 ISO 140-6 |
| Reaction to fire |
A1 |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
THERMOWOOL FLOOR STANDARD 110 |
THERMOWOOL FLOOR PROF 170 |
Test Method |
||
| Length |
mm |
1200 |
1200 |
DSTU EN 822 |
||
| Width |
mm |
600 |
600 |
DSTU EN 822 |
||
| Thickness (in 10 mm increments) |
mm |
50-200 |
30-100 |
DSTU EN 823 |
||
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
±2 / ±1.5% |
DSTU EN 13162 |
||
| Thickness tolerance class | T4 T5 | |||||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm | 50 | 30 |
| Quantity per package, boards, pcs | 6 | 7 |
| Quantity per package, m2 | 4.32 | 5.04 |
| Quantity per package, m3 | 0.216 | 0.151 |
| Quantity per pallet, packages, pcs | 32 | 48 |
| Quantity per pallet, m3 | 6.912 | 7.258 |
| Loading capacity in vehicle, volume 92, m3 | 76.032 | 79.834 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ACOUSTIC 40 is a non-combustible, hydrophobized sound-absorbing board made of mineral wool based on basalt group rock. The special fiber arrangement provides high sound absorption properties.
THERMOWOOL ACOUSTIC 40 boards are recommended for use as sound absorbers in frame partition and lining structures, suspended ceiling structures, and in floor structures with non-load-bearing insulation material installation.
Transportation and Storage
The boards are transported in accordance with the requirements of DSTU B V.2.7-167. The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The stack height during storage must not exceed 3 m. The guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
40±5 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.041 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
DSTU EN 826 |
| Sound absorption coefficient,
Boards 40 mm thick Boards 100 mm thick Boards 150 mm thick Boards 200 mm thick |
Class C Class A Class A Class A |
EN ISO 11654 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Logistics Parameters | ||
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs. | 12 | 6 |
| Quantity per package, m2 | 8.64 | 4.32 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 16 | 16 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading standard in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ROOF PROF 160 is a non-combustible, hydrophobized thermal and sound insulation board made of mineral wool based on basalt group rocks. Used in civil and industrial construction as a thermal insulation layer in new construction and renovation of buildings and structures for various purposes.
THERMOWOOL ROOF PROF 160 boards are designed for use as the primary thermal insulation layer in roofing systems with reinforced concrete or metal profiled decking with roofing membranes of all types, including installations without protective screeds.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
160±15 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,039 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.042 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
60 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
– |
DSTU EN 1607 |
| Point load, N, minimum |
600 |
EN 12430 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
30-130 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Thickness, mm | 30 | 100 | |
| Quantity per package, boards, pcs | 7 |
2 |
|
| Quantity per package, m2 | 5.040 | 1.440 | |
| Quantity per package, m3 | 0.1512 |
0.144 |
|
| Quantity per pallet, packages, pcs | 44 | 48 | |
| Quantity per pallet, m3 | 6.6528 | 6.912 | |
| Loading capacity per truck, volume, 92 m3 | 73.1808 | 76.032 | |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ROOF STANDARD 140 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock. Used in civil and industrial construction as a thermal insulation layer in new construction and renovation of buildings and structures for various purposes.
THERMOWOOL ROOF STANDARD 140 boards are designed for use as the primary thermal insulation layer in roofing systems on reinforced concrete or metal profiled decking with roofing membranes of all types, including installations without protective screeds.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
140±14 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,038 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.042 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
45 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
– |
DSTU EN 1607 |
| Point load, N, minimum |
450 |
EN 12430 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40–160 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T5 | ||
Logistics parameters:
| Thickness, mm50100 | |||
| Quantity per package, boards, pcs, | 4 |
2 |
|
| Quantity per package, m2 | 2.880 | 1.440 | |
| Quantity per package, m3 | 0.144 |
0.144 |
|
| Quantity per pallet, packages, pcs | 48 | 48 | |
| Quantity per pallet, m3 | 6.912 | 6.912 | |
| Loading capacity per truck, volume, 92m3 | 76.032 | 76.032 | |