TU U 22.2-32944149-012:2024
Thermal insulation boards made of extruded polystyrene foam
Product Description and Scope of Application
XPS CARBOLEX ECO FAS is an insulation board made of extruded polystyrene foam with a special milled surface on both sides.
Extruded polystyrene foam CARBOLEX ECO FAS
specially designed for plastered facade structures and foundation insulation.
It can also be used for other structures where enhanced adhesion requirements are imposed on insulation boards to the substrate.
Transportation and Storage
The boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from atmospheric precipitation.
Packaging Information
The boards are packaged in UV-stabilized film.
Application Instructions
According to SWEETONDALE Installation Instructions https://sweetondale.cz/docs/instruktsii/
|
Parameter |
Value |
Test Method |
| Compressive strength, kPa, minimum
30 mm 40 mm 50 mm 60 mm and above |
150 150 200 200 |
DSTU EN 826 |
| Tensile strength perpendicular to the board surface*, kPa |
100 |
DSTU EN 1607 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,033 |
DSTU EN 12939 |
| Thermal conductivity, W/m*K λA λB |
0.035 |
DSTU B V.2.7-182 |
| Water absorption during long-term immersion, not more than, % |
0,4 |
DSTU B EN 12087 |
| Flammability |
G4 |
DBN V.1.1-7 |
| Operating temperature |
from -50 °C to +75 °C |
|
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
*- tensile strength perpendicular to the face surfaces is determined for boards manufactured using the ThermoBonding method
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1180 (±10) |
DSTU EN 822 |
| Width |
mm |
580 (±8) |
DSTU EN 822 |
| Thickness*, boards with L-edge |
mm |
30, 40, 50, 100 |
DSTU EN 822 |
| Thickness tolerance class | T1 | ||
* – boards with a thickness of 60 mm and above may be manufactured using the ThermoBonding method
TU U 22.2-32944149-012:2024
Thermal insulation boards made of extruded polystyrene foam
Product Description and Scope of Application
Extruded polystyrene foam CARBOLEX ECO is a thermal insulation material with uniformly distributed closed cells.
XPS CARBOLEX ECO does not absorb water, does not swell or shrink, is chemically resistant and not susceptible to rot.
High strength allows for a level and rigid base, which significantly extends the service life of the entire thermal insulation system.
XPS CARBOLEX ECO is used in cottage and low-rise construction for thermal insulation of foundations, roofs, floors, and facade insulation.
Transportation and Storage
The boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from atmospheric precipitation.
Packaging Information
The boards are packaged in UV-stabilized film.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
| Parameter |
Value |
Test Method |
| Compressive strength, kPa, not less than
20 mm 30 mm 40 mm 50 mm 60 mm and above |
150 150 150 200 200 |
DSTU EN 826 |
| Tensile strength perpendicular to the board surface*, kPa |
100 |
DSTU EN 1607 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,033 |
DSTU EN 12939 |
| Thermal conductivity, W/m*K λA λB |
0.035 |
DSTU B V.2.7-182 |
| Water absorption during long-term immersion, not more than, % |
0,4 |
DSTU B EN 12087 |
| Flammability |
G4 |
DBN V.1.1-7 |
| Operating temperature |
from -50 °C to +75 °C |
|
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
*- tensile strength perpendicular to the facing surfaces is determined for boards manufactured using the ThermoBonding method
|
Parameter |
Unit of measurement |
Value, L-edge |
Value, straight edge |
Test Method |
| Length |
mm |
1180 (±10) |
1180 (±10) |
DSTU EN 822 |
| Width |
mm |
580 (±8) |
580 (±8) |
DSTU EN 822 |
| Thickness* |
mm |
30,40,50,100 |
20 |
DSTU EN 822 |
| Thickness tolerance class |
T1 |
|||
* – boards with a thickness of 60 mm and above may be manufactured using the ThermoBonding method
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT EXTRA 75 FG is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock, with a single-sided fiberglass cloth coating.
THERMOWOOL VENT EXTRA 75 FG boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in double-layer thermal insulation in ventilated facade systems with an air gap. When using insulation with fiberglass cloth, a windproof membrane is not required.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
75±7 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity per vehicle, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
ULTRAWOOL SOUND are non-combustible, hydrophobized sound-absorbing boards made of mineral wool based on basalt group rocks. The special arrangement of fibers provides high sound absorption properties.
ULTRAWOOL SOUND is recommended for use as a sound absorber in frame-panel partition and lining structures, in suspended ceiling structures, and in floor structures with non-load-bearing insulation material installation schemes
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
38±4 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Sound absorption coefficient,
Boards 40 mm thick Boards 100 mm thick Boards 150 mm thick Boards 200 mm thick |
Class C Class A Class A Class A |
EN ISO 11654 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1000, 1200 |
DSTU EN 822 |
| Width |
mm |
500, 600, 1000 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs. | 8 | 4 |
| Quantity per package, m2 | 5.760 | 2.880 |
| Quantity per package, m3 | 0.288 | 0.288 |
| Quantity per pallet, packages, pcs | 24 | 24 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL ACOUSTIC 40 is a non-combustible, hydrophobized sound-absorbing board made of mineral wool based on basalt group rock. The special fiber arrangement provides high sound absorption properties.
THERMOWOOL ACOUSTIC 40 boards are recommended for use as sound absorbers in frame partition and lining structures, suspended ceiling structures, and in floor structures with non-load-bearing insulation material installation.
Transportation and Storage
The boards are transported in accordance with the requirements of DSTU B V.2.7-167. The boards must be stored packaged and stacked on pallets separately by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The stack height during storage must not exceed 3 m. The guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
40±5 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.041 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
DSTU EN 826 |
| Sound absorption coefficient,
Boards 40 mm thick Boards 100 mm thick Boards 150 mm thick Boards 200 mm thick |
Class C Class A Class A Class A |
EN ISO 11654 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
40-200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Logistics Parameters | ||
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs. | 12 | 6 |
| Quantity per package, m2 | 8.64 | 4.32 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 16 | 16 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading standard in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT STANDARD 80 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
THERMOWOOL VENT STANDARD 80 boards are designed for use in industrial and civil construction as a thermal and sound insulation layer in ventilated facade systems.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
80±8 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.038 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength in the direction perpendicular to the board plane, kPa, not less than |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading standard in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT N 36 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock.
THERMOWOOL VENT N 36 boards are designed for use in civil and industrial construction in new construction and reconstruction of buildings and structures for various purposes as an inner layer in two-layer thermal insulation in ventilated facade systems with an air gap.
.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material ensures reliable and durable packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
36±4 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,037 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
0,5 |
DSTU EN 826 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–100, 130–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 12 | 6 |
| Quantity per package, m2 | 8.640 | 4.320 |
| Quantity per package, m3 | 0.432 | 0.432 |
| Quantity per pallet, packages, pcs | 16 | 16 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity in truck, volume 92 m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-006:2024
Thermal and acoustic insulation boards made of mineral wool
Product Description and Scope of Application
THERMOWOOL VENT EXTRA 75 is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rock.
THERMOWOOL VENT EXTRA 75 boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Transportation and Storage
Transportation of boards is carried out in accordance with the requirements of DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than 24 hours after storage at the warehouse. Boards must be stored packaged and stacked on pallets separately by grades and sizes. Throughout the entire storage period, the material must be protected from precipitation. The height of the board stack during storage must not exceed 3 m. Guaranteed storage period is 6 months from the date of manufacture.
Packaging Information
Polyethylene heat-shrink film is used for packaging. The wrapping method and fixation of the packaging material ensure reliable and durable packaging of the boards, protecting them during loading and unloading operations, transportation, and storage.
Application Instructions
In accordance with SWEETONDALE Installation Instructions
Main physical and mechanical characteristics:
|
Parameter |
Value |
Test Method |
| Density, kg/m3 |
75±7 |
DSTU B V.2.7-38 |
| Declared thermal conductivity at 10°C, W/(m·K), not more than |
0,035 |
DSTU B EN 12667 |
| Thermal conductivity, W/m*K λA λB |
0.039 |
DSTU B V.2.7-182 |
| Compressive stress at 10% linear deformation, kPa, not less than |
10 |
DSTU EN 826 |
| Tensile strength perpendicular to the plane of the board, kPa, minimum |
5 |
DSTU EN 1607 |
| Long-term water absorption, kg/m2, not more than |
3 |
EN 12087 |
| Short-term water absorption, kg/m2, not more than |
1 |
EN 1609 |
| Reaction to fire |
A1 |
DSTU EN 13501-1 |
| Combustibility class |
NG |
DBN V.1.1-7 |
| Effective service life, years, not less than |
50 |
DSTU B V.2.7-182 |
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
| Length |
mm |
1200 |
DSTU EN 822 |
| Width |
mm |
600 |
DSTU EN 822 |
| Thickness (in 10 mm increments) |
mm |
50–200 |
DSTU EN 823 |
| Tolerance limits length / width |
mm |
±2 / ±1.5% |
DSTU EN 13162 |
| Thickness tolerance class | T4 | ||
Logistics parameters:
| Length, mm | 1200 | 1200 |
| Width, mm | 600 | 600 |
| Thickness, mm50100 | ||
| Quantity per package, boards, pcs | 6 | 3 |
| Quantity per package, m2 | 4.32 | 2.16 |
| Quantity per package, m3 | 0.216 | 0.216 |
| Quantity per pallet, packages, pcs | 32 | 32 |
| Quantity per pallet, m3 | 6.912 | 6.912 |
| Loading capacity per vehicle, volume, m3 | 76.032 | 76.032 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible stone wool boards made from gabbro-basalt rock
Product Description:
TECHNOVENT N is a non-combustible, hydrophobized thermal and sound insulation board made from mineral wool based on basalt group rocks.
Application:
TECHNOVENT N boards are designed for use in civil and industrial construction during new construction and reconstruction of buildings and structures for various purposes as an inner layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
TECHNOVENT N |
TECHNOVENT N PROF |
Test Method |
|
Compressive strength at 10% deformation |
MPa |
not less than |
– |
– |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
NG |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,038 0,039* 0,041* |
0.037 0.040** 0.043** |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Compressibility |
% |
not more than |
20 |
10 |
DSTU B V.2.7-38 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
2,5 |
2,5 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
36±4 |
45+5 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
not less than |
50 |
50 |
DSTU B V.2.7-182 |
* – according to Protocol No. 42K/22 of SE NDIBK
** – according to Protocol No. 37-16/20 of SE NDIBMV
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 100, 130 – 200 (-2, +5) |
DSTU B V.2.7-38 |
|
|
Logistics Parameters |
||||
|
Length, mm |
1200 |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
150 |
200 |
|
Quantity per package, boards, pcs |
12 |
6 |
4 |
3 |
|
Quantity per package, m2 |
8,64 |
4,32 |
2,88 |
2,16 |
|
Quantity per package, m3 |
0,432 |
0,432 |
0,432 |
0,432 |
|
Quantity per pallet, packages, pcs |
16 |
16 |
16 |
16 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
6,912 |
|
Loading capacity in a vehicle with a volume of 92 m3 |
76,032 |
76,032 |
76,032 |
76,032 |
TU U V.2.7-23.9-35492904-005:2015
Non-combustible mineral wool boards based on basalt, laminated with glass cloth on one side
Product Description:
TECHNOVENT EXTRA SP are non-combustible, hydrophobized thermal and sound insulation boards made of mineral wool based on basalt group rocks, with a single-sided glass cloth coating.
Application:
TECHNOVENT EXTRA SP boards are designed for use in civil and industrial construction as single-layer thermal insulation or as an outer layer in two-layer thermal insulation systems in ventilated facade systems with an air gap.
Storage:
The boards must be stored packaged and stacked on pallets, separated by grade and size. Throughout the entire storage period, the material must be protected from precipitation. The height of the stack during storage must not exceed 3 m.
Transportation:
Transportation of boards must be carried out in accordance with the requirements of DBN G.1-4, DSTU B V.2.7-167. Boards are shipped to the consumer no earlier than after 24-hour storage at the warehouse.
Packaging Information:
Polyethylene heat-shrink film is used for packaging. The method of wrapping and fixing the packaging material must ensure reliable and secure packaging of the boards, their protection during loading and unloading operations, transportation and storage.
Main physical and mechanical characteristics:
|
Parameter |
Unit of measurement |
Criterion |
Value |
Test Method |
|
Tensile strength limit in the direction perpendicular to the surface |
MPa |
not less than |
0,005 |
DSTU B V.2.7-38 |
|
Compressive strength at 10% deformation |
MPa |
not less than |
0,01 |
DSTU B V.2.7-38 |
|
Flammability |
degree |
– |
Incombustible |
DBN V.1.1-7 |
|
Thermal conductivity: λ25 λA λB |
W/m·K |
not more than |
0,037 0,039* 0,040* |
DSTU B V.2.7-105 DSTU B V.2.7-182 DSTU B V.2.7-182 |
|
Compressibility |
% |
not more than |
3 |
DSTU B V.2.7-38 |
|
Vapor permeability |
mg/(m·h·Pa) |
not less than |
0,3 |
DSTU B V.2.7-253 |
|
Moisture content by mass |
% |
not more than |
0,5 |
DSTU B V.2.7-38 |
|
Water absorption by volume upon full immersion |
% |
not more than |
1,5 |
DSTU B V.2.7-38 |
|
Organic matter content |
% |
not more than |
4,0 |
DSTU B V.2.7-38 |
|
Density |
kg/m3 |
– |
75±7 |
DSTU B V.2.7-38 |
|
Effective service life |
years |
Not less than |
50* |
DSTU B V.2.7-182 |
* – according to Protocol No. 41K/22 of the State Enterprise NDIBK
Geometric parameters:
|
Parameter |
Unit of measurement |
Value |
Test Method |
|
|
Length |
mm |
1000, 2000, 2400 (±10) |
1200, 2000, 2400 (±10) |
DSTU B V.2.7-38 |
|
Width |
mm |
500 (±5) |
600, 1000 (±5) |
DSTU B V.2.7-38 |
|
Thickness (in 10 mm increments) |
mm |
50 – 200 (-2, +5) |
DSTU B V.2.7-38 |
|
|
Logistics Parameters |
||||
|
Length, mm |
1200 |
1200 |
1200 |
1200 |
|
Width, mm |
600 |
600 |
600 |
600 |
|
Thickness, mm |
50 |
100 |
150 |
200 |
|
Quantity per package, boards, pcs |
6 |
3 |
2 |
2 |
|
Quantity per package, m2 |
4,32 |
2,16 |
1,44 |
1,44 |
|
Quantity per package, m3 |
0,216 |
0,216 |
0,216 |
0,288 |
|
Quantity per pallet, packages, pcs |
32 |
32 |
32 |
24 |
|
Quantity per pallet, m3 |
6,912 |
6,912 |
6,912 |
6,912 |
|
Loading rate per truck, volume, m3 |
76,032 |
76,032 |
76,032 |
76,032 |